Car Lift Operation Specifications and Maintenance Guide

1. Car Lift Equipment and Vehicle Pre - inspection

1. 
   

   Equipment status confirmation

   
   

   Confirm that the power system, hydraulic device and safety valve of the lift are functioning normally, and ensure that there is no oil leakage or mechanical failure.

2. 
   

   Vehicle Assessment:

   
   

   
   

   Check the vehicle's load-bearing structure, tire condition, and chassis integrity to eliminate any safety hazards during the lifting process.

3. 
   

   Lifting point selection:

   
   

   Determine the appropriate lifting support position for the vehicle based on the manufacturer's technical specifications to avoid structural damage.

2. Safety regulations for car lifting operations

1. 
   

   Preparation requirements

   
   

   The work area needs to be clear of obstacles, and operators should wear protective equipment and receive professional training.

   
   

2. 
   

   Execution process

   
   

   Gradually raise the vehicle to the target position according to the procedure, and monitor the equipment stability and vehicle balance status in real time during the process.

3. 
   

   Abnormal handling

   
   

   In case of sudden vibration or abnormal noise, immediately activate the emergency stop function and continue the operation after troubleshooting.

4. 
   

   Collaboration norms

   
   

   When multiple people work together, a designated commander must be assigned to ensure that instructions are delivered clearly and accurately.

3. Car Lift Equipment Management after Use

1. 
   

   Performance inspection:

   
   

   Check the integrity of the lift's structural parts, the sealing of the hydraulic system, and the reliability of electrical components, and record any abnormalities.

2. 
   

   Daily maintenance

   
   

   Regularly lubricate the guide rails, reinforce fasteners and clean the surface to avoid equipment aging caused by environmental factors.

3. 
   

   Standardized storage

   
   

   When the equipment is out of use, it must be placed in a dedicated moisture-proof and corrosion-proof site, and anti-rust treatment should be performed if it is idle for a long time.

4. Periodic professional maintenance

1. 
   

   Monthly inspection

   
   

   Professional technicians will conduct comprehensive equipment performance testing, including load testing and safety device effectiveness verification.

   
   

2. 
   

   Annual overhaul

   
   

   Replace core components that have reached their service life, update control system software, and maintain the technological advancement of the equipment.

Car Lift

If you're looking for more information on lifts, check out jintuoautotech.com. There are tons of related products you can compare and choose from, which might even give you some new ideas.

car lift operation video

https://www.youtube.com/@jintuoautotech